Hydrostatic Tool Trap Manual Wireline Pressure Control
I. Product brief description:
Anti-drop device, also known as the next catcher. It is a safety device to prevent the tool string from accidentally falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve.
II. Main technical parameters:
| Number | Specification | Pressure rating | PN |
| 1 | 2inch | 35MPa, 70 MPa | s0*-0*.0*.00 |
| 2 | 2.5inch | 35MPa, 70 MPa | s0*-0*.0*.00 |
| 3 | 3inch | 35MPa, 70 MPa | s0*-0*.0*.00 |
| 4 | 4inch | 35MPa, 70 MPa | s0*-0*.0*.00 |
Note: The specifications not listed in the above table can be provided according to customer needs
III. Working principle:
When working, the steel wire or cable passes through the slot in the middle of the fork of the anti-dropping device. When the tool string is lifted into the anti-dropping device, the shift fork is lifted into an upright position.
IV, daily maintenance:
1. Do product test every time before going to the well;
2. After each use,
(1). Check whether the o-ring is damaged and replace it in time;
(2). Check whether the manual fork is flexible;
3. When not in use temporarily, you should bring the protective wire for storage.
Baoji Ruixin Energy Equipment Co.,Ltd has only focused on the research and development and manufacturing of slickline equipment and tools, built a high-tech enterprise with excellence and pursued the professionalism and accuracy of products. Always follow the site, serve the site, and solve the site problems with rich experience and technology; Ensure the practicability of the product. To provide excellent equipment and sincere service for slickline service companies in China and other countries around the world.
Product Tags:
|
|
Manual Wireline Pressure Control Equipment Hydrostatic Tool Trap Alloy Steel Images
|
